If your sofa bed will not close, it’s a situation that can quickly turn frustrating. Worry not, as this is a common problem that can be solved with some careful troubleshooting. This step-by-step guide will walk you through the process of diagnosing and fixing the issue so that you can fold that sofa bed back to its original position.
Step 1: Identify the Problem
The first step when your sofa bed will not close is to identify where the issue might be originating. You’ll need to inspect:
- The frame
- The mattress
- The locking mechanism
Step 2: Gather Required Tools
Before diving into the repair, make sure you have the following tools on hand:
- Screwdriver
- Wrench
- Lubricant spray
- Cloth or towel
Step 3: Unjamming the Mechanism
If the issue is with the locking mechanism, follow these steps:
- Locate the locking mechanism; it’s often situated at the junction where the bed folds.
- Use a screwdriver to gently pry it open.
- If it still doesn’t budge, use a wrench to gently turn the adjoining bolts and nuts.
- Once the mechanism is unlocked, try folding the sofa bed to see if it closes.
Step 4: Lubricate the Joints
If the joints are causing the problem and the sofa bed will not close, lubrication might help. Follow these steps:
- Extend the sofa bed completely.
- Use a cloth or towel to clean the joints.
- Spray a thin layer of lubricant on all the moving parts.
- Wait a few minutes for the lubricant to settle.
- Attempt to close the sofa bed again.
For more articles on sofa beds click here: Sofa Bed: All You Need to Know About Sofa Beds
Step 5: Check the Mattress
Sometimes, a bulky or misaligned mattress can be the reason why your sofa bed will not close. If that’s the case, try these steps:
- Remove the mattress from the frame.
- Inspect it for any irregularities like lumps or misshaped areas.
- If the mattress appears to be in good condition, place it back, making sure it aligns properly with the frame.
- Attempt to close the sofa bed.
If after following these steps your sofa bed still will not close, it may be time to consult a professional for further troubleshooting and repair.